Verification: 8d66d4318388e612

Qingdao Beizhong Equipment Technology Co., Ltd.

Aviation Servo Valve, Deflector Jet Servo Valve, Jet Pipe Servo Valve, Direct Drive Servo Valve, Gantry-mounted Jet Pipe Servo Valve,
+8613395324919

Technical Analysis and Extreme Condition Application of Lee Micro Precision Solenoid Valves

Issuing time:2026-06-29 13:29Author:Qingdao North Heavy Equipment Technology Co., Ltd.

美国 Lee照片 (1) - 副本.png

1. Brand Technical Overview

Founded in 1948, The Lee Company has long focused on the field of micro fluid control. Featuring patented MultiSeal® sealing structure, precise Lohm flow resistance calibration and ultra-compact integrated valve body design, it has become a benchmark brand for micro valves applied in high-pressure, wide-temperature and confined-space working conditions. Lee valves are capable of operating under 3,000–8,000 PSI high pressure and a wide temperature range from -54℃ to 135℃. With core advantages of ultra-low leakage, fast response, low power consumption and ultra-long cycle life, the products have undergone decades of rigorous condition verification in aerospace, oil & gas and high-end industrial equipment, delivering industry-leading stability and reliability.
Our company specializes in supplying genuine original Lee valves. This article conducts a comprehensive technical analysis of nine core series including SDBX, SDBB, PRTA, CHRA, CKFA, FSHF, JEVA, PLGA and PRFA, covering structural principles, core performance, technical advantages and application scenarios. It provides professional technical support for customers in system design, model selection, working condition matching and equipment upgrading.
Core Product Model List: SDBX0571350B, SDBX0571400B, PRTA1871470D, CHRA1256505A, CKFA3756201A, FSHF3800005A, FSHF6700005A, JEVA1855698D, PLGA1251010A, PRFA3756200L, SDBB2131013A, SDBB2131113A

2. Core Structure and Technical Principles of Each Series

2.1 SDBB Series: Dual-Coil Redundant Direct-Acting Solenoid Valve (SDBB2131013A, SDBB2131113A)

The SDBB series is Lee’s high-end safety redundant solenoid valve, adopting an independent dual-coil driving structure. The two sets of electromagnetic coils serve as mutual backups, ensuring normal valve operation even if one coil fails, which fully meets the safety redundancy design standards for aerospace and downhole oil & gas equipment. Equipped with the integrated MultiSeal® full-perimeter sealing technology, it eliminates the traditional split O-ring sealing structure without leakage dead angles, fundamentally preventing medium leakage and seal aging failure.
The valve features a rated working pressure of 3,000 PSI, millisecond-level fast response and controllable micro leakage, suitable for long-term continuous power-on operation. SDBB2131013A and SDBB2131113A are differentiated models with different flow resistance and port sizes, matching hydraulic circuits with various flow ratios. They are widely used in high-precision hydraulic commutation, system pressure maintenance and pilot oil circuit on-off control.

2.2 SDBX Series: Single-Coil Compact Direct-Acting Solenoid Valve (SDBX0571350B, SDBX0571400B)

As a lightweight simplified version of the SDBB series, the SDBX series inherits the original MultiSeal® sealing architecture while optimizing the valve structure, featuring smaller size, lighter weight and lower power consumption. It is the preferred model for small-flow and high-frequency switching circuits. Rated at 3,000 PSI pressure resistance, the valve withstands alternating high and low temperatures from -54℃ to 135℃ and is compatible with various fluids including aviation fuel, flame-retardant hydraulic oil and conventional hydraulic media.
SDBX0571350B and SDBX0571400B are two standardized Lohm flow resistance specifications with factory precision calibration, delivering high flow accuracy and strong pressure impact resistance. Adopting a standard cartridge modular design, it can be directly press-fitted into integrated valve blocks without additional sealing accessories. The simple assembly process adapts to the integrated design requirements of high-density multi-way valve groups.

2.3 PRFA/CKFA Series: Integrated One-Way Throttle Control Valve (PRFA3756200L, CKFA3756201A)

This series is a composite integrated valve integrating precision throttle orifice and check valve, realizing the integrated functions of precise forward throttling and free reverse flow. It replaces the traditional series combination of separate check valve and throttle valve, effectively reducing installation space and leakage points, avoiding series flow resistance interference, and greatly improving system operation stability.
The throttle orifice adopts micron-level precision grinding technology with 100% factory flow resistance calibration, maintaining stable flow under drastic pressure differential fluctuations. PRFA3756200L and CKFA3756201A are gradient flow models with a maximum pressure resistance of 5,000 PSI. Sulfur-resistant material options are available for corrosive downhole oil & gas working conditions, widely used in actuator speed regulation, cylinder buffering and system damping pressure stabilization circuits.

2.4 FSHF Series: High-Pressure Zero-Leakage Check Valve (FSHF3800005A, FSHF6700005A)

The FSHF series is Lee’s classic Chek® high-pressure check valve, adopting a ball-and-cone hard seal structure to achieve zero reverse leakage with accurately controlled opening and closing pressure. Manufactured from 316 stainless steel, the valve body features excellent corrosion resistance and anti-sedimentation performance, adapting to high-mineralization, impurity-containing and corrosive fluid media in harsh downhole working conditions.
FSHF3800005A and FSHF6700005A are high-flow and low-flow differentiated models. The side outlet structure effectively prevents jamming caused by sediment and impurities, with superior anti-blocking performance compared with traditional axial check valves. With a maximum pressure resistance of 8,000 PSI and continuous high-temperature resistance up to 180℃, it is mainly used for anti-backflow and pressure maintenance of downhole hydraulic tools and actuators.

2.5 PLGA/CHRA Series: Adaptive Pressure-Compensated Constant Flow Valve (PLGA1251010A, CHRA1256505A)

Featuring adaptive pressure compensation technology, this series is equipped with high-precision sensing diaphragms and variable throttle structures. It dynamically adjusts the throttle opening in real time according to front and rear pressure differences, maintaining constant flow within a wide pressure differential range of 0.5–35 MPa, and thoroughly solving common industry problems such as unstable flow speed and asynchronous operation caused by load fluctuation.
PLGA1251010A and CHRA1256505A are specifications with different rated flow rates, characterized by high calibration accuracy and extremely low discrete error. The compact micro-cartridge structure supports dense layout, suitable for aviation actuators, precision servo systems and high-end industrial equipment. It is widely applied in multi-actuator synchronous control, sensor micro-flow flushing and servo pilot pressure stabilization oil supply.

2.6 PRTA/JEVA Series: Low-Power Pilot-Operated Solenoid Control Valve (PRTA1871470D, JEVA1855698D)

PRTA and JEVA series are pilot-operated solenoid valve groups adopting a "low-power pilot stage + large-flow main valve" driving architecture. They realize fast on-off control of large-flow oil circuits with extremely low electromagnetic power consumption, balancing low energy consumption and large flow capacity, ideal for remote electric control switching of high-pressure and large-flow hydraulic systems.
The valve core contact surface adopts hardening wear-resistant treatment to resist cavitation and impurity abrasion, ensuring trouble-free operation after tens of millions of high-frequency switching cycles with ultra-long service life. The suffix D represents an upgraded sealing version, compatible with phosphate ester and synthetic ester aviation flame-retardant hydraulic oils with enhanced medium compatibility. PRTA1871470D and JEVA1855698D feature differentiated pilot opening pressure and response speed, widely used in aviation fuel cut-off, aircraft landing gear hydraulic control and downhole electric control reversing mechanisms.

3. Common Core Technical Advantages of Full Series

3.1 Patented Sealing System with Zero Leakage and High Reliability
All core valves adopt Lee’s self-developed MultiSeal® patented sealing structure, replacing the traditional multi-O-ring stacked sealing scheme. The integrated metal composite seal realizes 360° all-round sealing, significantly reducing leakage points. It effectively resists high and low temperature deformation, medium swelling and high-pressure extrusion damage, maintaining stable long-term sealing performance and lowering valve block processing and assembly costs.
3.2 Precise Flow Resistance Calibration with Strong Batch Interchangeability
All throttling and flow control products adopt the original factory Lohm unified flow resistance calibration system, with piece-by-piece testing and calibration before delivery. The ultra-low flow discrete error ensures consistent system circuit matching and full batch interchangeability, fundamentally solving equipment instability problems such as uneven speed and asynchronous operation caused by ordinary valve flow deviation.
3.3 Excellent Extreme Condition Adaptability and Environmental Tolerance
The product temperature range covers -54℃ extreme low temperature to 135℃ high temperature, adapting to extreme environments such as high-altitude low temperature and downhole high temperature. The pressure grade ranges from 3,000 PSI to 8,000 PSI, meeting standard industrial and high-pressure oil & gas working conditions. Equipped with stainless steel valve bodies and multi-material sealing accessories, it adapts to complex media containing sulfur, high corrosion and impurities with outstanding anti-aging and anti-wear performance.
3.4 Micro Integrated Design for Lightweight Requirements
All products adopt a standard cartridge structure with compact size and simple installation. They can be directly press-fitted or thread-mounted on integrated valve blocks without additional mounting bases, greatly reducing the volume and weight of hydraulic systems, and conforming to the miniaturization and lightweight development trend of aerospace, downhole equipment and high-end precision equipment.

4. Core Industry Application Scenarios

4.1 Oil and Gas Exploration Equipment
This complete valve set forms a full micro downhole hydraulic control system. FSHF check valves realize system pressure maintenance and anti-backflow; PRFA/CKFA throttle valves complete actuator buffering and speed regulation; SDBX/SDBB solenoid valves realize electric control switching and cut-off of oil circuits; PLGA/CHRA constant flow valves ensure stable oil supply for precision circuits; PRTA/JEVA pilot valves control large-flow hydraulic circuits. The whole set perfectly adapts to extreme downhole working conditions of high temperature, high pressure and high corrosion.
4.2 Aerospace High-End Equipment
With redundant safety design, lightweight structure, ultra-long service life and wide temperature adaptability, the valves are widely used in core systems such as aircraft landing gear hydraulic systems, flight control actuators and fuel control circuits, meeting the strict aerospace technical standards for high reliability, high safety and low power consumption.
4.3 High-End Precision Industrial Hydraulic Equipment
Applied to precision servo platforms, intelligent hydraulic machine tools and automatic execution equipment, the valves improve equipment operation accuracy and stability through precise flow and pressure control, optimize equipment integration layout, and support the miniaturization and high-precision upgrading of high-end equipment.

5. Our Technical Supporting Services

With years of in-depth experience in Lee micro fluid control components, our company has a complete supply system and professional technical service capabilities. For the above full series models, we provide one-stop services including genuine original spot supply for single and batch orders with factory test reports and material certificates, one-on-one engineer model selection, circuit scheme optimization, flow and pressure difference verification, equipment installation guidance, fault troubleshooting, localization replacement scheme comparison, and compliant import and export document processing, fully solving customers’ difficulties in model selection, supply and commissioning.

6. Conclusion

With exclusive sealing technology, accurate fluid control capability and extreme working condition adaptability, Lee micro valves serve as core essential components of high-end micro hydraulic systems. The nine series cover five core fluid control functions including electromagnetic switching, one-way pressure maintenance, precision throttling, constant voltage and current stabilization, and pilot control, forming a complete micro hydraulic control unit matrix. Relying on genuine supply advantages and professional technical accumulation, our company provides stable and high-quality products and customized fluid control solutions for customers in oil & gas exploration, aerospace equipment and high-end industrial manufacturing, helping customers realize equipment efficiency improvement and technical iteration upgrading.


推荐文章
Address: No. 258 Jufeng Road, Licang District, Qingdao City, Shandong Province        Email:lanjunzheng76@gmail.com                   TEL:+8613395324919